Important Safety Information  – Maximiza Pull Up Bars

WARNING

FAILURE TO READ AND FOLLOW THE INSTALLATION AND SAFETY INSTRUCTIONS STATED HERE AND ON THE INSTRUCTION SHEET MAY RESULT IN SERIOUS INJURY, DEATH OR PROPERTY DAMAGE.

SAFETY IS IMPORTANT

Garren Fitness takes safety seriously and we make strong efforts to provide installation and usage instructions and safety warnings to all customers. It is the full responsibility of each customer to ensure that those instructions and warnings are followed correctly.

The Maximiza Pull Up Bar (like every other brand of doorway pull up bar) is NOT permanently fixed to the doorframe and, as a result, can fall if incorrectly installed or if safe usage instructions are not followed EVERY time it is used.

When using a pull up bar, your full bodyweight is being held many feet above the floor and any falls can cause serious or fatal injury. Your risk of injury is greatly reduced when you practice safe techniques and common sense.

The safety of this bar depends on how you mount it to the doorframe and how you use it

SAFE INSTALLATION AND USAGE WARNINGS:

  • – Install only in solid and stable doorframes using the supplied doormounts
  • – Always install the screw-in heavy-duty doormounts (Yes, they are required)
  • – Before every use, ensure that bar is fully and firmly tightened in the doormounts. Cautiously test that it is stable and can support your weight before commencing any exercises.  Failure to ensure bar is secure could result in the bar falling and causing serious injury
  • – Do not exceed recommendations for maximum installation heights or weight supported (as per Instruction Sheet)
  • – Recommended for use for pull-ups and chin-ups. Not recommended for gymnastics, kipping or as a child’s plaything
  • – Recommended for adult usage. Not recommended for unsupervised use by a child.
BE SAFE!

ALWAYS CHECK it’s secure and safe every time before you use it. Yes, the screws are required! Always use the heavy-duty doormounts.

 

MAKE SURE IT IS INSTALLED PROPERLY

1. Heavy-duty doormounts: The screw-in heavy-duty doormounts are required to be fixed to a sturdy doorframe

Attach the metal heavy-duty doormount to the doorframe with the 4 screws with the silicon plug placed in the center

 

 

 

 

 

 

 

 

 

 

 

2. The silicon end-pieces must be placed in the end of the pull up bar

Silicon end piece

The silicon end-pieces must be placed in the end of the pull up bar

 

 

 

 

 

 

 

3. Ensure the pull up bar is seated fully and firmly in the heavy-duty doormounts

Fully and firmly in the heavy-duty doormounts

Ensure the pull up bar is seated fully and firmly in the heavy-duty doormounts

 

 

 

 

 

 

 

 

 

4. Use the securing screws at each end of the bar.

Securing Screws

Once the bar has been installed in the doorframe, the securing screws at each end of the bar can be tightened with the supplied Allen wrench

 

 

 

 

 

 

 

 

 

 

 

USE AT YOUR OWN RISK

There are some inherent risks involved in using the listed product including but not limited to serious or fatal injury. Products we sell are intended for experienced adults over 18 years of age.  By using this product, you are accepting that you using it at your own risk.

Garren Fitness will not be held liable under any circumstance for incidental or consequential loss, damage or injury due directly or indirectly to the use of this product. Buyer fully accepts responsibility & releases Garren Fitness from liability for any and all personal injuries, fatal injuries, costs & other damages incurred as a result of the Buyer or anyone else’s use of the product.

 

© Garren Fitness LLC

Updated April 30, 2023